ACM Panels

Care for ACM Panels Installation

While the ACM Panels have many benefits for home or office building, you should also know the key tips for the ACM Panels Installation safely.

It actually composes of two 0.5 mm treated aluminum outer sheets with a polyethylene core. You can use the aluminum composite material (ACM) panels in various building segments.

ACM Panels Installation

ACM Panels Installation

Those are façades and retrofit, cladding works, internal and external walls, roofs and awnings, porches, columns, beams and pillars, among other applications.

These panels are easy bendable. which allows their application on cylindrical elements or various geometric shapes.

Alucobond and Alpolic are most popular brands of ACM panels, available in various sizes and colors.

For the exterior cladding with composite aluminum, it has thicknesses ranging from 3 mm to 6 mm. The length and width vary by design. The higher the thickness, the higher the sound attenuation and temperature reduction indices provided by the polyethylene core. What can also change is the color of the plate.

The great advantage of ACM Panels Installation system is the ease of assembly. In addition to the lightweight parts – a 3 mm panel weighs about 4.5 kg / m2. They can be bolted or installed on an aluminum frame attached to the façade.

Our experts are always ready to suggest you the most suitable sizes of Alucobond and Alpolic ACM panels for your project.

However, you must take care with the plumb and level of the aluminum substructure. If the service person fits a panel misaligned, the surface may vary. Therefore, you must have to hire the service with specialized labor.

Another important caution is with the handling and storage of the panels. To prevent the panels from buckling or warping they should be stored horizontally on shelves or pallets.

In addition, parts must be arranged by size so that the vertices of the smaller parts do not scratch the largest at the ACM Panels Installation stage

Check out the caring tips that a service person must consider when installing ACM panels:

1. Plate forming

The first step is to cut the panels, which arrive at the work in the form of flat plates. Take the flap at least 25 mm, where you will fasten them to the angles.

You should install them with spacing that varies according to the dimensions of the panel. In addition, you need to join the tabs with L-profiles.

2. Fixing structure

The aluminum substructure is what ensures the fixing of the plates in the facades. First, install the columns. Insert them into the slabs by means of screws of para-bolt type. Then fix the horizontal cross-mounts to the columns with the help of specific support.

The spacing between columns and sleepers varies according to the dimensions of the panel in ACM.

3. Plumb and level

It is important that the substructure is upright and level. It is to ensure the agility of panel installation work and the minimization of improvisation.

4. Installing the panels

Before attaching the panel to the substructure, remove the protective film partially in the region of the tabs. Then, fix the panel to the substructure by means of the angles.

5. Joints

Finally, it is time to join the panels with silicone or grease. This joint should be between 10 mm and 12 mm, depending on the orientations of the designer. In addition, the use of round foam between plates is recommended to prevent silicone rupture.